Adding main System raw image

README.md

@@ -196,7 +196,7 @@ pi@RIP2:~ $ sudo a2ensite 001-RIP-webApp.conf
 pi@RIP2:~ $ sudo apachectl configtest
 pi@RIP2:~ $ sudo systemctl reload apache2.service
 pi@RIP2:~ $ sudo cp ./php.ini /etc/php/[php-version]/apache2/php.ini
-pi@RIP2:~ $ sudo cp ./010_rip-reboot /etc/sudoers.d/010_rip-reboot
+pi@RIP2:~ $ sudo cp ./010_rip-reboot /etc/sudoers.d/010_rip-rebootc
 pi@RIP2:~ $ sudo reboot
 ```
 

RIP_AP/hostapd.conf

@@ -0,0 +1,29 @@
+##### hostapd configuration file ##############################################
+# location /etc/hostapd/hostapd.conf
+#####
+
+interface=wlan0
+driver=nl80211
+hw_mode=g
+
+##### channel selection here
+channel=6
+#####
+
+wmm_enabled=0
+macaddr_acl=0
+auth_algs=1
+ignore_broadcast_ssid=0
+wpa=2
+wpa_key_mgmt=WPA-PSK
+wpa_pairwise=TKIP
+rsn_pairwise=CCMP
+
+##### uncomment the good RIP SSID
+ssid=RIP_1
+#ssid=RIP_2
+#ssid=RIP_3
+#ssid=RIP_4
+#####
+
+wpa_passphrase=azertMAX

gpioTest.py

@@ -0,0 +1,18 @@
+#!/usr/bin/env python3
+ 
+import RPi.GPIO as GPIO
+import time
+
+def click(self):
+    print('event detected')
+
+in_pin = 4
+GPIO.setmode(GPIO.BCM)
+GPIO.setup(in_pin, GPIO.IN, pull_up_down=GPIO.PUD_UP)
+GPIO.add_event_detect(in_pin, GPIO.FALLING, callback=click,
+                                  bouncetime=100)
+
+while  True:
+    time.sleep(0.2)
+
+